croyd
New Member
Posts: 4
|
Post by croyd on Nov 14, 2007 18:05:12 GMT -5
I just received my EMS USB2 and I hooked it up to my laptop. I switched it to PC mode and installed the drivers fine. It seems to recognize that I have 2 pads connected.
However, when I run Stepmania, only the pad in the gun controller slot is recognized....which ends up being Joy 2 in Stepmania. If I pull out the dance pad in the gun controller slot, it recognizes the pad in the game controller slot as Joy 1.
How do I get both to be recognized ? In XP it looks like it recognizes both.
Any help?
Thanks
|
|
|
Post by hkems on Nov 14, 2007 20:12:18 GMT -5
Well, are you running Vista 32 or XP ?
|
|
croyd
New Member
Posts: 4
|
Post by croyd on Nov 14, 2007 22:00:17 GMT -5
Well, are you running Vista 32 or XP ? I'm running Windows XP SP2. XP recognizes both pads it looks like but in Stepmania, only 1 joypad seems to work. I tried the "Test Input" option and the 2nd pad wouldn't register until I pull one of them out.
|
|
|
Post by hkems on Nov 14, 2007 22:04:22 GMT -5
|
|
croyd
New Member
Posts: 4
|
Post by croyd on Nov 15, 2007 12:11:16 GMT -5
Yup that's the one. It has 2 blue slots. Croyd
|
|
|
Post by hkems on Nov 15, 2007 21:08:49 GMT -5
It seems that your dancing pads draw too much electricity, thus the USB port could not support both of your dancing pad at the same time
|
|
croyd
New Member
Posts: 4
|
Post by croyd on Nov 15, 2007 21:13:42 GMT -5
Ah that could be.....1 of my pads is a cobalt flux. ;-) I'll try a 2nd soft pad. Thanks! It seems that your dancing pads draw too much electricity, thus the USB port could not support both of your dancing pad at the same time
|
|
|
Post by hkems on Nov 18, 2007 20:21:15 GMT -5
hehe....for any inquiry, you may post here or email to us. sales@hkems.com Thanks
|
|