urri
New Member
Posts: 3
|
Post by urri on Sept 26, 2007 6:47:13 GMT -5
Transferer2, which you sent me does not work - it shows error (Error 452: connection problems). Also the indicator (LED) twinkles in a strange way - it is always different with different computers. An electric engineer I know says these are problems with power. I tried it with the following computers: 1.Sempron 2600+,Windows XP Home,"Parallel Port mode" ECP+EPPv1.9,USB2.0 2.Celeron 433,Windows XP Home,"Parallel Port mode" ECP+EPPv1.9,USB1.1 3.Duron1200,Windows XP Professional,"Parallel Port mode" ECP+EPPv1.9,USB2.0 And of course UserPort(378)
|
|
|
Post by hkems on Sept 26, 2007 21:27:54 GMT -5
Please connect the power cable (USB) only, don't connect the parallel port cable. If the LED turns solid green without flashing, the power is not the problem. In case the power is not the problem, please test again with ECP or EPP setting. Some computer works only in ECP, or EPP, but not in ECP + EPP. Thanks
|
|
urri
New Member
Posts: 3
|
Post by urri on Sept 27, 2007 1:53:20 GMT -5
I try ECP, ECP+EPP......all combinations in BIOS now in four different computers.
If I connect only USB (for power) the LED is NOT lighting (absolutely! looks like it off!). LED lighting only if BOTH cables attached to Transferer2 and switch tuned to GB or GBA mode.
Can I open Transferer2 for checking ?
|
|
|
Post by hkems on Sept 27, 2007 3:57:05 GMT -5
>> If I connect only USB (for power) the LED is NOT lighting (absolutely! looks like it off!). <<
In case it is not the problem of the USB port, it is either the problem of the Transferer II or the USB cable.
For this case, please don't open it yourself. We recommend you to send it back to us.
We have received your email about this case, we would reply your email. Thanks.
|
|
urri
New Member
Posts: 3
|
Post by urri on Sept 27, 2007 6:27:46 GMT -5
It will be easier to buy from you a new Transferer2, the one I have I will throw away, besides I need one more cartridge (32Mb GBSmartCard). If I order it again, can you double check how Transferer2 and GBSmartCard work before sending them and guarantee 100% that they will work?
|
|
|
Post by hkems on Sept 27, 2007 22:03:42 GMT -5
Every goods were checked before we send it out. In case you order again, we will double check the items to make sure that they are 100% workable. To order from us again, please kindly send email to us. We would give you reply as soon as possible. Thanks
|
|
|
Post by Vince on Nov 4, 2007 1:49:48 GMT -5
Does Celeron 433mhz compatible with winxp?
THANKS
|
|
|
Post by hkems on Nov 4, 2007 21:17:30 GMT -5
In case you have 2G ram, you could install WinXP. In case you have 256M ram, you could install Win2k. thanks
|
|