andre
New Member
Posts: 11
|
Post by andre on Mar 30, 2007 17:30:59 GMT -5
Hi! Hmm how shall I describe this.. I've installed everything and I shall now try to describe more detailed how I installed it all so that you can correct me if I've done something wrong. (I didnt want to buy AC-DC so I prefered to lose the recoil function).. Anyway.. *I connected G1 to L1 *My screen is 165cm (65inch) wide and 125cm (50inch) high, dont know what this is in "inch". So I have my two Leds in the middle of the screen. *s this right? And i estimate that I should stand about 3-3.5meters away from the screen, *rong or right? ..Anyway.. * have connected the two Top Guns G4 to the PS2's two USB ports. But to be able to do this I had to sacrifice the recoil function, as said before, and then connected the G1 to L1, also as said before. This Guide told me to do so but I'm not sure if it's right or not: www.hkems.com/product/xbox/simpleguide_eng.pdf*The two Leds that I have in the middle of the screen, only one of them is glowing, should this one be to the left or to the right? I currently have it on the right side of the screen. *When I calibrate I first shot (A) at the top of the Left Led then (B) in the middle (C) In the top left corner of the screen, the (D) in the top right corner, then (E) in the lower right corner, then (F) in the lower left corner. What have I done wrong that makes my calibration try's fale? Very very grateful if you could help me on this one
|
|
andre
New Member
Posts: 11
|
Post by andre on Mar 30, 2007 19:26:03 GMT -5
There was another set of Leds you could buy, now that you know how big my screen is, do you think, by buying this, I'll get rid of having the Leds in the middle of the screen so that I can have them on the sides instead?
|
|
andre
New Member
Posts: 11
|
Post by andre on Mar 31, 2007 8:33:51 GMT -5
I think why it did'nt work was because I did'nt press the A and B together/pointing the gun away from the screen. This should be the first thing I should do I guess.
But my screen is kinda huge, I think, and the laser dot should flash, when Im in calibration mode, when I've done it right.
But my calibration always get a bit messed up it's not accurate. This is because when I should do the C,D,E & F... you know, shoot all the corners of the screen it does'nt always flashes exactly where I would want it to flash, that is in the corners.
I always have to compromise and that makes the accuracy a bit messed up.
What could this be?
Is the Leds not enough in the middle? Is something disturbing? Is my Screen to big?
Not a very big problem hehe, but would be nice if I could get it corrected. ;D
THX
|
|
andre
New Member
Posts: 11
|
Post by andre on Mar 31, 2007 20:45:53 GMT -5
I tried Time Crisis III today with some buddys of mine and we always stumbled upon one problem. The game is time based. You have to beat every area before the time runs out. But we cant shoot an enemy standing very close to my screens right edge.
When I calibrated. The laser dot flashed very much to the left, but was very restricted to the right of the screen. Why is this?
This problem and the 2player problem is my only two problems right now otherwise It has all worked out great for me ;D
|
|
andre
New Member
Posts: 11
|
Post by andre on Apr 1, 2007 10:05:19 GMT -5
So to sum it all up! How can I play 2player without buying the AC-adaptor, your guide told me this was possible, so can you more detailed help me what to do? Because in calibration mode, only one of the two guns are able to get calibrated. And.. Why cant the Leds read the laser dot in the edge of my screen? Is my screen to huge for the Leds to register? My screen is 165cm (65inch) wide and 125cm (50inch) high, dont know what this is in "inch". The weird part is, I think it all would work out fine if the Leds could register the laser dot less on the left and more to the right. How can I do this? Make it more even so to speak
|
|
|
Post by hkems on Apr 1, 2007 23:22:58 GMT -5
hello ;D Your screen is 82inch (diagonal), you may try to place the LED stands beside the screen. If it doesn't work, you may place it inside the screen. Please note that the distance between the gun and the screen is 2-3 times of that between the two LED stands. For your case, there should be some interupt sources near the edge, therefore the laser pointer keep flashing when you aim the gun near the edge. Please note that any light could be a possible interupt sources. Please remove or cover those interupt sources. Note : except the red LED, all the LEDs on the two stands are infrared LEDs which are not visible for human eye. The red LED will turn ON to indicate if the power is ON. Thanks.
|
|
andre
New Member
Posts: 11
|
Post by andre on Apr 2, 2007 10:31:18 GMT -5
(I didnt want to buy AC-DC so I prefered to lose the recoil function).. Anyway.. *I connected G1 to L1 * have connected the two Top Guns G4 to the PS2's two USB ports. But to be able to do this I had to sacrifice the recoil function, as said before, and then connected the G1 to L1, also as said before. This Guide told me to do so but I'm not sure if it's right or not: www.hkems.com/product/xbox/simpleguide_eng.pdfHow can I play 2player without buying the AC-adaptor, your guide told me this was possible, so can you more detailed help me what to do? Because in calibration mode, only one of the two guns are able to get calibrated Have I done something wrong or got it all wrong or have I forgotten to do something? Thanks for the help
|
|
|
Post by hkems on Apr 2, 2007 21:34:35 GMT -5
|
|