|
Post by hkems on Feb 18, 2008 1:36:38 GMT -5
Well, there is no way to use TopGun on Dreamcast........
|
|
|
Post by hkems on Feb 18, 2008 1:43:33 GMT -5
I have not tried, but it should ok to use TopGun in MAME. First, you should install the GunCon2PC driver (by Smog). Please make sure that you could use the gun to move the mouse pointer on destop. Second, run the MAME with the -mouse comand to enable the mouse input. And then in the game, press Tab, and you should able to set the X axis and Y axis. After that, you should able to use the TopGun.
|
|
|
Post by macdmacm on Feb 18, 2008 19:56:23 GMT -5
Hello all. I just signed up, yes I am a newbie. My Q involves an EMS TOPGUN. I have a 42in LCD PHILIPS HDTV. I have read all the Q's and A's, tried many things, but none work. My problem is, when I plug the gun up after game is loaded I can not get into the calibration mode. But if I plug the gun in then turn on my PS2 (Time Crisis 2), the calibration menu automatically comes up, ok. Then when I try to shoot the target in center the gun will register it then say hit a or b to continue. when I try to shoot the menu icons the gun is off, by a mile. I have no heat, sunlight, or any other obstructions in the way. I'm in a log cabin room with two small windows and trees all around my house, ok no sunlight. why will the gun not shoot right. please help me, will provide phone number if need to ask a lot of questions. Ga resident.
|
|
|
Post by hkems on Feb 20, 2008 20:47:05 GMT -5
>> My problem is, when I plug the gun up after game is loaded I can not get into the calibration mode. << The calibration mode mentioned in the manual, means the hardware calibration (i.e. to shoot the points ABCDEF) For details, please refer to point 7 in the manual: www.hkems.com/product/xbox/completeguide(eng).pdfYou should finish the hardware calibration before you do the software calibration (i.e. the GunCon calibration in the game). In the game Time Crisis 2/3, you could start the software calibration in the controller setting. If you have any question, please email to us. sales@hkems.com Thanks
|
|
|
Post by Goshen on Feb 24, 2008 22:35:24 GMT -5
My problem is that I when I am mapping the trigger in MAME it thinks I am pressing Y- and Y+ at the same time as well, every time, even when the gun is pointing at the ground.
|
|
|
Post by hkems on Feb 25, 2008 20:32:34 GMT -5
|
|
|
Post by orion4874 on Feb 28, 2008 0:52:20 GMT -5
Will there be any way to use this gun with the Xbox 360 in the future? Some kind of adaptor maybe? Why wasn't the 360 included, light gun compatible games will be released sooner or later such as House of the Dead 4? Will there be another model topgun relased that can be used with the 360?
|
|
|
Post by hkems on Feb 28, 2008 20:16:17 GMT -5
Well, as the XBOX360 official light gun has not been released yet, it is impossible to develop a lightgun for XBOX360. So, you have to wait until the official XBOX360 gun shooting game and lightgun to be released first. Thanks
|
|
laum
New Member
Posts: 1
|
Post by laum on Mar 3, 2008 11:18:27 GMT -5
I live in HK, and I am very interested in EMS TopGun, I checked out with many game shop but I can not find this gun, do you know where can I buy the gun?
|
|
|
Post by hkems on Mar 3, 2008 20:20:52 GMT -5
|
|
|
Post by paloma e luciana on Mar 5, 2008 19:06:03 GMT -5
Hello, I cannot get either one of my topguns to work. I have a ps2, and a 51 inch tv. I have tried shutting everything off in my house except the tv console, and led bars. It does not seem to recognize the gun(s) at all. I have tried moving in closer, and moving further back (bout 20 feet max back). I have moved the led bars horizontal, and even inside the screen just trying to get some kind of outcome with no avail. I bought two guns so I tried switching light bars. I then took them to my 29 inch tv, and had the same problem. I had everything turned off except what was needed to play. I also tried looking for the LED's on my camera phone with no avail, but I find it very unlikely that both bars on two seperate guns are broken. The guns recoil in normal mode, but do not register anything. When I change to calibration mode nothing happens at all...Tried calibrating in order, and shooting wherever to get some results. please help me. I realy want to run these games on my big screen. -danile666
|
|
|
Post by hkems on Mar 5, 2008 20:13:42 GMT -5
For this matter, please send an email to us (sales@hkems.com) It would be easier for us to follow your case by email. Thanks
|
|
|
Post by MasterQ on Mar 23, 2008 13:12:10 GMT -5
Hi,
My EMS works fine with PS2 (time Crisis 2) but it's giving the error "Unknown USB Device Detected" when i plug into PS3. I have the 40GB ver PS3. Please advise.
|
|
|
Post by Kaziebo on Mar 24, 2008 8:16:42 GMT -5
Hey,
i've got a strange problem. When I start gun2mouse and then move the LCD TopGun from left to right (X-as) the mouse moves from top to bottom (Y-as) on the crt screen. And vice versa.
I don't know how, but it looks like the X-as and Y-as are switched. Do you know how to fix this?
Thanks, Kaziebo
|
|
|
Post by hkems on Mar 24, 2008 21:28:03 GMT -5
Hi MasterQ. Our TopGun could be recognized by PS3, but only in the GunCon2 compatible games. That is, you could load a GunCon2 compatible game (e.g. time crisis 2) on PS3, and plug the TopGun to PS3, and it could then be recognized. By the way, as I know, 40GB PS3 is not compatible with PS2 games. That is, you could not run GunCon2 compatible games on it. You may double check the specification on the PS3 box.
|
|