bad09
New Member
Posts: 2
|
Post by bad09 on Nov 19, 2007 13:18:47 GMT -5
Thanks hkems!! works perfectly with smogs driver!
|
|
|
Post by thegrump on Nov 19, 2007 20:36:14 GMT -5
For some reason I can't seem to get the MAME setup link to work. It just stalls on adobe acrobat reader. Ok. I don't seem to have the "pointer hog" issue with smog's driver now. I don't know what did it, but the mouse is working now. My main complaint at this point is that I can't program the hat switch to work as arrows, just a wheel - who needs a dmn wheel on a light gun anyway. (I really want a way to bypass the MAME warning screens without reaching for the keyboard) - Man, are we lazy in this remote control age or what?-. I am also a bit peeved that I can't seem to map any buttons to 1 and 5 for credits and start buttons. I pretty much want to start the game and then set back with just the gun in my hand untill I finish the game. Please fix the trigger issue with your driver. That is the only issue I had with it in MAME. Anyway, still a great gun.
|
|
|
Post by hkems on Nov 20, 2007 2:30:53 GMT -5
In case you could not open the guide (PDF) with IE, you may right click and save the following PDF file. www.hkems.com/temp/MAME%20multiple%20TopGun%20setup.pdf I don't have the problem you mentioned. With Smog's driver, I could set A=1, B=5, thus I could enter the game with the TopGun. Anyway, we would fix this in our driver for sure. Thanks
|
|
|
Post by thegrump on Nov 21, 2007 13:02:50 GMT -5
Ok. So far I have not needed to set the axes in any game MAME runs if I am using SMOG's driver. But I still can not seem to get 1 and 5 mapped to buttons in the driver. I can set them but they don't affect anything in MAME and they will not produce any effect in note pad after mapped. I noticed last night when attempting to configure game specific controls that all buttons read as Light Gun 3 B2. So every button was being read the same. When I get home this evening, I will uninstall the driver and erase the game configs and start from scratch. It's very possible that I have messed some settings up and not realize it (I HAVE been know to do that before...). Wish me luck! Eventually I hope to be blasting away at Area51 and other games as happily as I do at Resident Evil 4 Wii!
|
|
|
Post by hkems on Nov 21, 2007 20:40:17 GMT -5
ok, in case you have any problem, please email to us : sales@hkems.com Thanks
|
|
|
Post by mykell on Dec 3, 2007 17:56:33 GMT -5
Hello. I picked up a LCD Topgun a couple days ago. Up until now, it has been working quite well. I've used both your driver and the guncon2pc drivers. However, just now, the gun seemed to stop functioning properly.
When it is plugged in to the pc, the laser turns on and does not allow me to enter callibration mode. The gun2mouse program says it is plugged in and functioning, but it does not register any of the buttons pressed. I've uninstalled drivers, reinstalled drivers, reset to restore points, etc. with no success?
Any suggestions?
|
|
|
Post by hkems on Dec 3, 2007 21:38:16 GMT -5
The calibration data in the gun is lost for some reason. Thus, it would enter the calibration mode automatically when it is connected to PC. For this case, after you plug in the gun, the gun is in calibration mode already. You could finish the hardware calibration process, and the gun would be come normal. thanks
|
|
|
Post by mykell on Dec 3, 2007 22:27:53 GMT -5
Sweet, got it working. Much obliged for the help.
|
|
|
Post by hkems on Dec 4, 2007 20:31:23 GMT -5
hehe...you are welcome ;D
|
|
|
Post by Chris on Dec 27, 2007 8:14:59 GMT -5
Hi
Got 2 EMS TopGuns for Christmas and have been unable to play on them with Time Crisis 2 or 3.
Unable to set up the calibration, I have read through this forum and I have tried the floor test, 30cm on the floor and fired in the centre and all around, but nothing is happening!!
The RHS LED light is on, the laser light comes on in calibration mode and goes out if I press SE/BA and Start together and the gun will recoil.
Would the LED's be faulty??
Or is there another explanation?
For your info, I am using a PS2 console with a projector screen. The screen is 50" in width and I have the LED strips mounted on the wall either side of the screen, total distance 55".
I would like to play my new games and guns before next Christmas......
Thank you
|
|
|
Post by hkems on Dec 27, 2007 20:50:04 GMT -5
Please send an email to us : sales@hkems.com We would tell you what to do in details. thanks
|
|
|
Post by nathan crandell on Jan 22, 2008 0:10:27 GMT -5
I am having a hard time getting my topgun working with my super nintendo emulator or my nintendo emulator. I am using zsnesw and jnes emulators, but it isnt recognizing the gun in one of the ports. For some reason when i am looking at the settings menu for the gun and click on one of the buttons to change the configuration, it doesnt recognize me hitting buttons. pls hlp.
|
|
|
Post by hkems on Jan 22, 2008 20:08:25 GMT -5
Is the game / emulator supports mouse ? I am not sure if the gun works for zsnesw and jnes emulators. You may try to install Smog's GunCon2PC driver. xoomer.alice.it/guncon2/You may send us the emulator and the roms by email. I would test it and may be able to tell you how to get it to work. our email : sales@hkems.com Thanks
|
|
|
Post by Andrew on Feb 1, 2008 21:37:32 GMT -5
Hi.
I use standard MAME on my mame cabinet.
I can't get the gun to work in mame with the gun2mouse or Smogs driver. Does it only work in MAME32? Or should it work in MAME also?
thanks Andrew
|
|
|
Post by Philip on Feb 5, 2008 13:09:12 GMT -5
i know this may be a daft question but is there any way to get the lcd topgun working on the deamcast or sega saturn using joypad converters at all as i would love to still play some of the dc light gun games on an lcd screen cheers
|
|