|
Post by hkems on Jun 14, 2007 23:26:47 GMT -5
Hello There is no way to use TopGun with Dreamcast, as TopGun is not designed to support it. TopGun is not compatible with Dreamcast at all.
|
|
|
Post by opticledilusi0n on Jun 20, 2007 14:50:32 GMT -5
So, it has been tested and confirmed to not work through the total control adapters ?
|
|
|
Post by hkems on Jun 20, 2007 21:26:31 GMT -5
Yes, it is tested and it doesn't work.
|
|
|
Post by opticledilusi0n on Jul 23, 2007 14:42:06 GMT -5
oh that stinks
|
|
|
Post by hkems on Jul 25, 2007 3:38:00 GMT -5
Well, there is no DC lightgun to support LCD / Plasma / Projector screen yet. I like the "house of the dead 2" on DC too, but it is not likely to play it with my LCD TV. By the way, you may consider to play this game on PC
|
|
|
Post by The Necromancer on Aug 1, 2007 17:26:59 GMT -5
Hi, I brought two light guns and am having a hard time getting them to work. But I think this is due to my OS. Is Gun2mouse workable with Vista? It freezes, even when I put compatibility mode on. (lol I think that would be a 'yes') Anyway if not I can connect the guns to the comp, install them as linkgun (whatever it was) in the device manager, use the infered light and they click back when the fire but thats it. Thanks in advance!
|
|
|
Post by hkems on Aug 2, 2007 4:22:46 GMT -5
We don't have driver for Vista yet, we are sorry about that.
|
|
|
Post by Bruton on Aug 16, 2007 8:33:00 GMT -5
I'm getting rid of my Xbox and was wondering since I can play House of the Dead III on the 360, will the TopGun work with the 360 also?
|
|
|
Post by hkems on Aug 16, 2007 22:29:15 GMT -5
Our TopGun could support Xbox, but it is not compatible with Xbox 360.
|
|
|
Post by Andrew on Aug 18, 2007 10:45:34 GMT -5
Hi
I've just bought the TopGun for my PS2 but can't get it to work.
I'm running it with Time Crisis 2 but find it impossible to enter the calibration mode by pressing A+B for 5 seconds.
At what point of the game should I try to enter calibration mode?
What do I do at the start of the game on the Gcon calibration page? The only way past this is to unplug the TopGun.
Then I arrive at the options page (Arcade etc) but it is not possible to make any selections because the gun isn't working.
Any tips would be appreciated. Thanks.
|
|
|
Post by hkems on Aug 19, 2007 20:58:48 GMT -5
Hello Andrew Please note the followings and try again: 1. make sure the switch "X/P" is set to "P". 2. turn ON the laser pointer switch. 3. Load the game first before you connect the gun to PS2. 4. After you connect the gun to PS2, pull the triger and see if it would give you a "bang" sound. If so, hold A+B to enter the calibration mode. 5. After you have finished the hardware calibration (i.e. shoort ABCDEF according to the manual), you should enter the controller option and calibrate the gun in the game. If you still can't use your TopGun, please email to "sales@hkems.com, we would reply you as soon as possible. Thanks ;D
|
|
|
Post by Seth on Sept 1, 2007 18:31:46 GMT -5
i just bought your product, and i cant figure out why i cant even get past the calibration screen on Time Crisis 3. the recoil works, and there is sound, but otherwise i cant use it. i'm not using an LCD or any sort of Hi-Def TV.
|
|
|
Post by hkems on Sept 2, 2007 21:13:22 GMT -5
Hello Please make sure the followings: 1. You should connect the gun to PC after the game is loaded and you have entered the game screen. 2. Please make sure that the distance between the gun and screen should be 2-3 times of that between the two LED stands. 3. Please make sure that there is no interruption sources (sun light / strong light...etc) behind / beside the screen, nor in the sigth of the camera on the gun. If you still have any problem, please send email to sales@hkems.com. We would reply your email as soon as possible. Thanks
|
|
|
Post by Art on Sept 3, 2007 9:28:15 GMT -5
I have recently bought the gun and I like it alot however ever since I installed it I cant seem to go back to using my standard mouse. Is there something I need to do to use it again? thanks, Art
|
|
|
Post by Art on Sept 3, 2007 10:25:38 GMT -5
Nevermind I figured out it had to do with my usb hub. thanks
|
|