|
Post by opticledilusi0n on Jun 14, 2007 13:50:32 GMT -5
Hi, I am wondering if there are any wireless controllers known to work with total control adapters . I have the Total Control Plus, but my Logitech Cordless action controllers do not work (sony licensed) and my gamestop unlicensed controllers also do not work .
Also, does the total control output 9volts just as a ps2 controller port does ?
|
|
|
Post by hkems on Jun 14, 2007 23:25:02 GMT -5
We haven't tested any wireless controller with Total Control Plus, we are not sure if any wireless controller is known to work with it. >> Also, does the total control output 9volts just as a ps2 controller port does ? As I remember, the PS2 controller port should be 7V.
|
|
|
Post by opticledilusi0n on Jun 20, 2007 14:46:30 GMT -5
pin 3 is 9v
Pin Name Description 1 DATA Data 2 CMD Command 3 N/C (9V) Not connected (newer dual-shock controllers use it as power for the vibration mechanism) 4 GND Ground 5 VCC Vcc 6 ATT ATT select 7 CLK Clock 8 N/C Not connected 9 ACK Acknowledge
i'm assuming the wireless receiver grabs power off pin 3, 9V line
i will dig out my multimeter and see if my tc adapter outputs 9v
|
|
|
Post by hkems on Jun 20, 2007 21:39:02 GMT -5
Well, I am not quite sure about such things. If you have more info, please kindly post here. thanks
|
|
|
Post by opticledilusi0n on Jul 23, 2007 14:47:49 GMT -5
my PS2 outputs 9v (as does my PS1) from pin 3 according to my fluke .
the EMS TCP has 6v out on ps2 port pin 3 .
that might be why it does not work . I cannot get tech specs from Logitech or Pelican about how their wireless products get power for receiver or what power requirements are .
I assume it is probably through the 9v rail, but I will try hacking up a ps2 extension cable and plugging it inbetween ps2 and wireless receivers and see if i can't try to cut 9v from pin 3 which will tell me if they work off of voltage from elsewhere . if not, i know pin 3 powers it . then i can try to drop voltage from there until it does not work .
thanks
|
|
|
Post by hkems on Jul 25, 2007 3:56:24 GMT -5
Nice work, please keep us informed about your test result
|
|
|
Post by opticledilusi0n on Sept 13, 2007 14:57:07 GMT -5
unfortunately, no dice ;(
|
|
|
Post by hkems on Sept 13, 2007 23:11:08 GMT -5
oh...It seems that wireless controller doesn't work for TCP....
|
|
|
Post by ukebaoxof on Aug 2, 2019 2:28:48 GMT -5
|
|
|
Post by ugebonesac on Aug 2, 2019 5:11:31 GMT -5
|
|