|
Post by Jon on Jun 2, 2014 12:15:04 GMT -5
I followed all the windows7 64 instructions to get my TopGun II working as a functional mouse, but the recoil broke so now I have to use the TopGun III.
I have the 4 infrared LEDs installed and hooked up RF Receiver shows up as HID Compliant Minidriver for EMS TopGun EMS TopGun 1 shows up in TopGunPanel The gun will shoot, recoil and do mouse clicks, however it will not move the cursor, and I can not enter calibration mode. Ive tried holding A and B, nothing happens, I've changed batteries..still the same. I've tried "hard calibration" where you turn off gun, hold trigger 5 seconds, turn on, the laser appears and flashes 5 times then becomes solid, but as soon as I let go of the trigger , solid laser disappears and it won't let me calibrate.
|
|
|
Post by Jon on Jun 2, 2014 12:16:28 GMT -5
The EMS TopGun II worked perfectly, but now TopGun 3 doesnt work.
|
|
|
Post by jumpman on May 26, 2017 13:49:35 GMT -5
Did you ever have any luck with this? I am having the same problem.
I put new batteries in, when I hold the trigger and start the gun the laser blinks 5 times, then turns on and stays on until i release the trigger. when I release the trigger I cant get the laser back on. If I start the gun then press A+B for 5,10,20 seconds, the laser never turns on. pressing b+Start disables the recoil, why isn't a+B starting calibration?
is it the EMS topgun III, all black edition
|
|