|
Post by Animefur on Oct 21, 2007 1:14:20 GMT -5
;D
Worked great, thanks!
Keep that in mind, guys, in case your dog eats one, etc, 1 ycable and 1 led stand is enough for Dual recoil.
Thanks again for all your help!
|
|
|
Post by hkems on Oct 21, 2007 20:57:43 GMT -5
you are welcome ;D
|
|
|
Post by Florent on Oct 23, 2007 3:59:11 GMT -5
Hello, I buy 2 topgun on play asia two week ago. I use one gun with PC and xbox and it work very fine. But the second one don't work on pc and xbox. the red laser is constantly lit even outside sensors and the recoil dont work at all. And the gun is not detected. What can i do? Thanks
|
|
|
Post by animefur on Oct 23, 2007 10:49:40 GMT -5
Hello again!
I am currently in a state of change. The guns physically work, but i wanted to use both guns in hotd1,2,3 and mame 0119++. So I removed the ems driver and rebooted with the guns not connected(was getting the slowdown sometimes reported) and installed the Smog Guncon suite.
When i pluggen in my guns, they were recognized as Guncon 2, and i pointed it to smogs driver(xp folder) but then it asked to configure the hid complient mouse and failed.
It follwed by continually re- Discovering the guncon 2 device in a loop.
Any ideas on how to go for a clean install/ remove something i may have missed?
Thanks!
|
|
|
Post by hkems on Oct 23, 2007 20:33:37 GMT -5
>> but then it asked to configure the hid complient mouse and failed. << After installed Smog's GunCon2PC driver, it would recognize the gun as a mouse and pop up another hardware installation wizard to install the "mouse". At this step, I always let it search a suitable driver automatically, and it always success. I have no idea why it fail in your case. When I switch between different TopGun drivers, I always do the follows: 1. visit device manager, right click the TopGun (i.e. GunCon2 device / EMS LCD TopGun V3.2 or similar things), un-install it. 2. Start --> program files --> "GunCon2 PC Driver Suite" / "EMS TopGun" ---> un-install. 3. Disconnect the gun, reboot the PC. 4. Connect the gun again and install the new driver. Hope that this could help you. Thanks
|
|
|
Post by florent on Oct 24, 2007 3:17:42 GMT -5
Hello again, I buy 2 topgun on play asia two week ago. I use one gun with PC and xbox and it work very fine. But the second one don't work on pc and xbox. the red laser is constantly lit even outside sensors and the recoil dont work at all. And the gun is not detected. What can i do?
Thanks
|
|
|
Post by hkems on Oct 24, 2007 20:35:08 GMT -5
Regards the 2nd gun, it's likely that the calibration data is lost for some reason, thus the gun enter the calibration mode automatically. To fix this, you could do the hardware calibration, and the gun would become normal. You may also shoot at the middle of the screen for 6 times so as to quit the calibration mode, and let the gun become normal first. And then, you could enter calibration mode (hold A+B for 5-10 sec) and calibrate the gun again. In case you still can't get it to work, please send an email to us. sales@hkems.com Thanks
|
|
|
Post by florent on Oct 25, 2007 0:52:58 GMT -5
Ok thansk.
|
|
|
Post by florent on Oct 25, 2007 0:57:17 GMT -5
YES is alive aliiiiive. ;D Thanks a lot for the help. GREAT product.
|
|
|
Post by hkems on Oct 25, 2007 20:50:22 GMT -5
Nice. For any inquiry, welcome to post here or email to us : sales@hkems.com ;D
|
|
|
Post by Gary on Nov 2, 2007 6:03:23 GMT -5
Any progress with a releasing a working Vista Driver yet? Thanks
|
|
|
Post by hkems on Nov 4, 2007 21:14:21 GMT -5
We are now developing new XP driver for TopGun (to support latest MAME and troubleshooter and 2 players). TopGun Vista driver is our next target. Thanks
|
|
|
Post by thegrump on Nov 17, 2007 14:19:09 GMT -5
I recently purchased a LCD Topgun and its amazing to finally have a gun that will work with my big screen television and my laptop. I am however having problems with the drivers. The EMS driver works great everywhere but in MAME. I can't seem to get the trigger to work in the games. It works fine everywhere else (as the left mouse button), but not in MAME. I am running MAME32 v119u3. Smog's driver runs the trigger in most games(sadly not area51 yet) but it ties up the mouse when the gun is plugged in and I can not use the mouse to navigate windows. Any help would be appreciated. Again, great gun. Here's to making it better in time.
|
|
bad09
New Member
Posts: 2
|
Post by bad09 on Nov 18, 2007 5:53:00 GMT -5
I have the same problem as thegrump, my gun works fine and I can play house of the dead 2 fine but with MAME the trigger won't work. I can move the cursor around the screen but I cannot assign the buttons to the gun I've tried a few setup guides but nothing seems to work! Can anyone help?? (I am using mame32 0.120)
|
|
|
Post by hkems on Nov 18, 2007 20:20:07 GMT -5
|
|